Albany®

The Albany stands as a benchmark for dependable, impeccably crafted freestanding wood stoves in the industry. Offering radiant warmth to expansive living spaces spanning 200 – 240 sq.m*, this wood fire combines reliability with elegance. Load wood effortlessly from either side for unparalleled convenience and bask in the cozy embrace of its comforting heat.

• Perfect for smaller rooms
• Single Rod Draft Control
• Steel Firebox
• Quality Firebrick Lining

Standard Features

• Heats approx. 200 – 240 sq.m*
• Large glass viewing area (458 x 260mm)
• Single rod draft control
• Strong bakelite handles
• Steel firebox with cast iron lining

Options

• 8mm steel baffle
• Airwash system
• Powerful 3-speed thermostatically controlled fan
• Low emissions: 0.5 g/kg

* Varies depending on home floor plan, house layout, heat loss of the house and quality/moisture content of wood.

Specifications (mm)

Where fitted thermostatically controlled fans do not activate until fire heats up and may take 20-30 mins.
NOTE: Heating capacity and any burn times are a guide only and can be affected by some or all of the following examples: drafts under doorways or between floorboards, large glass areas not covered by heavy drapes/curtains, green, wet or damp wood, ceiling heights greater than 2.4 metres or cathedral type ceilings, poor  or no insulation.
Heating capacities are based on cooler Australian climate areas – warmer geographical locations within Australia such as Queensland, Northern NSW and Western Australia should factor an increase in unit heating area.
This is a guide – specifications based on the current model at time of publishing. Always refer to the data plate for unit specific details.

Dimensions

* Measured to top of flue collar for height (Kingston, Gosford)
**Including Ash Lip (Kingston)

Clearances To Combustible Materials & Minimum Hearth Measurements

Note (2) Standard Default Kit only required includes 2 lengths of decromesh.