Bellerive®
Large Wood Insert
Crafted with your lifestyle at the forefront, the Bellerive wood fire emerges as the ultimate selection for expansive family or living spaces. Its design is tailored to seamlessly integrate into larger existing fireplaces, ensuring both functionality and style. Unlike traditional setups where heat may dissipate up the chimney, the Bellerive’s innovative construction ensures that most of the heat generated remains within your home, creating a snug and inviting atmosphere for you and your loved ones.
Standard Features
- Heats approx. 250+ sq.m*
- Large glass viewing area (595x290mm)
- Single rod draft control
- Strong bakelite handles
- Steel firebox with cast iron lining & a firebrick base
- Airwash system
- Black 3-sided fascia
- 2-speed fan
- Low emissions: 0.8g/kg
- 65% efficiency
Options
- Zero clearance kit
- Steel baffles
* Heating capacity and any burn times are a guide only and can be affected by some or all of the following examples: drafts under doorways or between floorboards, large glass areas not covered by heavy drapes/curtains, green, wet or damp wood, ceiling heights greater than 2.4 metres or cathedral type ceilings, poor or no insulation
Specifications (mm)
| Unit Dimensions | |
|---|---|
| A | 1100 |
| B | 730 |
| C | 544 |
| D | 464 |
| E | 590 |
| F | 695 |
| G | 150 |
| H | 153 |
| Minimum Fireplace Opening | |
|---|---|
| Width | 699 |
| Height | 597 |
| Depth | 468 |
| Masonry Chimney Hearth Clearances | |
|---|---|
| H | 1017 |
| I | 400 |
| J | 110 |
| K | 1200 |
| L | 600 |
| M | 30 |
| Zero Clearance Hearth Dimensions | |
|---|---|
| H | 1017 |
| I | 820 |
| J | 30 |
Zero Clearance Dimensions To Combustible Materials
Zero Clearance Box Dimensions
ALL FRAMING MATERIAL (WHERE SHADED) MUST BE NON-COMBUSTIBLE
NOTE: The Bellerive and Berwick are approved for zero clearance installations – please see manual for exact instructions.
It is important to understand and check local regulations prior to commencing installation.
Note: Heating capacity and any burn times are a guide only and can be affected by some or all of the following examples: drafts under doorways or between floorboards, large glass areas not covered by heavy drapes/curtains, green, wet or damp wood, ceiling heights greater than 2.4 metres or cathedral type ceilings, poor or no insulation.
All product specifications are subject to change without notice. Before installing refer to the relevant product manual for full and up to date information. Product pictures are a guide only, all wood fires must be installed as per AS 2918 :2001. All Regency wood fires exceed stringent joint Australian and New Zealand Standards ASNZS 4012/4013 (2014). Not all products are available at all outlets.