Berwick®
Medium Wood Insert
Introducing the Berwick wood fire, a modern marvel crafted for medium-sized living spaces. Its contemporary design and compact size make it the perfect fit for areas where traditional wood heaters may seem impractical. With the Berwick, even fireplace openings once deemed too small can now accommodate the warmth and charm of a wood fire. For added versatility, you have the option to fashion your own fireplace using the Regency-approved zero clearance box, allowing you to customize your heating solution to suit your space.
Standard Features
- Heats approx. 180+ sq.m*
- Large glass viewing area (458x260mm)
- Single rod draft control
- Strong bakelite handles
- Steel firebox with firebrick lining
- Airwash system
- Black 3-sided fascia
- 2-speed fan
- Low emissions: 0.6g/kg (new model)
- 61% efficiency
Options
- Zero clearance kit
- Steel baffles
- Cast iron liners
* Heating capacity and any burn times are a guide only and can be affected by some or all of the following examples: drafts under doorways or between floorboards, large glass areas not covered by heavy drapes/curtains, green, wet or damp wood, ceiling heights greater than 2.4 metres or cathedral type ceilings, poor or no insulation
Specifications (mm)
Unit Dimensions | |
---|---|
A | 940 |
B | 698 |
C | 479 |
D | 415 |
E | 585 |
F | 637 |
G | 177 |
H | 153 |
Minimum Fireplace Opening | |
---|---|
Width | 640 |
Height | 589 |
Depth | 420 |
Masonry Chimney Hearth Clearances | |
---|---|
H | 875 |
I | 350 |
J | 110 |
K | 1185 |
L | 600 |
M | 30 |
Zero Clearance Hearth Dimensions | |
---|---|
H | 875 |
I | 570 |
J | 24 |
Zero Clearance Dimensions To Combustible Materials
Zero Clearance Box Dimensions
ALL FRAMING MATERIAL (WHERE SHADED) MUST BE NON-COMBUSTIBLE
NOTE: The Bellerive and Berwick are approved for zero clearance installations – please see manual for exact instructions.
It is important to understand and check local regulations prior to commencing installation.
Note: Heating capacity and any burn times are a guide only and can be affected by some or all of the following examples: drafts under doorways or between floorboards, large glass areas not covered by heavy drapes/curtains, green, wet or damp wood, ceiling heights greater than 2.4 metres or cathedral type ceilings, poor or no insulation.
All product specifications are subject to change without notice. Before installing refer to the relevant product manual for full and up to date information. Product pictures are a guide only, all wood fires must be installed as per AS 2918 :2001. All Regency wood fires exceed stringent joint Australian and New Zealand Standards ASNZS 4012/4013 (2014). Not all products are available at all outlets.