Cardinia®
Crafted for warm cozy living spaces of various styles, the Cardinia is tailored for small to medium-sized areas. Its sleek contemporary design offers simplicity alongside functionality. Noteworthy attributes of this radiant heater include a spacious glass viewing panel, capable of heating around 160 – 200 sq.m*, and the flexibility to arrange logs either front-to-back or side-to-side.
- Perfect for smaller rooms
- Single Rod Draft Control
- Steel Firebox
- Quality Firebrick Lining
Standard Features
- Heats approx. 160 – 200 sq.m*
- Large glass viewing area (458 x 260mm)
- Single rod draft control
- Strong bakelite handles
- Steel firebox with firebrick lining
- Airwash system
- Low emissions: 0.5 g/kg
Options
- Steel baffle
- Cast iron liners
- Cast iron cook top
* Varies depending on home floor plan, house layout, heat loss of the house and quality/moisture content of wood.
Specifications (mm)
Heating capacity | 160-200 m2 |
Efficiency | 69% |
Emissions (g/kg) | 0.5 |
Average heat output (kW) | 10 |
Where fitted thermostatically controlled fans do not activate until fire heats up and may take 20-30 mins.
NOTE: Heating capacity and any burn times are a guide only and can be affected by some or all of the following examples: drafts under doorways or between floorboards, large glass areas not covered by heavy drapes/curtains, green, wet or damp wood, ceiling heights greater than 2.4 metres or cathedral type ceilings, poor or no insulation.
Heating capacities are based on cooler Australian climate areas – warmer geographical locations within Australia such as Queensland, Northern NSW and Western Australia should factor an increase in unit heating area.
This is a guide – specifications based on the current model at time of publishing. Always refer to the data plate for unit specific details.
Dimensions
A* | 692 |
B | 585 |
C** | 463 |
D | 152 |
E | 180 |
* Measured to top of flue collar for height (Kingston, Gosford)
**Including Ash Lip (Kingston)
Clearances To Combustible Materials & Minimum Hearth Measurements
Standard Default Kit (1)
A | 700 |
B | 225 |
C | 450 |
D | 192 |
E | 147 |
F | 450 |
G | 880 |
H | 1105 |
AHD Special Kit
A | 750 |
B | 250 |
C | 450 |
D | 192 |
E | 147 |
F | 450 |
G | 880 |
H | 1105 |
Note (1) Standard Default Kit used for clearances includes 1 x 900 mm length of 130° stainless between active flue and 2 lengths of decromesh.