Gosford®
Exceptional in both stature and functionality, the Gosford offers unparalleled high-efficiency heating for optimal comfort. Its sleek design seamlessly blends with Regency’s renowned reliability and cutting-edge wood burning innovations. Through advanced burn extension technology, the Gosford generates impressive heat output while consuming minimal wood, ensuring greater efficiency and warmth.
- Perfect for smaller rooms
- Single Rod Draft Control
- Steel Firebox
- Quality Firebrick Lining
Standard Features
- Heats approx. 280 – 320 sq.m*
- Large glass viewing area (576 x 275mm)
- Single rod draft control
- Strong bakelite handles
- Steel firebox with firebricks lining the base
Options
- Cast iron liners
- 8mm steel baffle
- Airwash system
- Powerful 3-speed fan
- Low emissions: 1.5 g/kg
* Varies depending on home floor plan, house layout, heat loss of the house and quality/moisture content of wood.
Specifications (mm)
| Heating capacity | 280-320 m2 |
| Efficiency | 65% |
| Emissions (g/kg) | 1.5 |
| Average heat output (kW) | 13 |
Where fitted thermostatically controlled fans do not activate until fire heats up and may take 20-30 mins.
NOTE: Heating capacity and any burn times are a guide only and can be affected by some or all of the following examples: drafts under doorways or between floorboards, large glass areas not covered by heavy drapes/curtains, green, wet or damp wood, ceiling heights greater than 2.4 metres or cathedral type ceilings, poor or no insulation.
Heating capacities are based on cooler Australian climate areas – warmer geographical locations within Australia such as Queensland, Northern NSW and Western Australia should factor an increase in unit heating area.
This is a guide – specifications based on the current model at time of publishing. Always refer to the data plate for unit specific details.
Dimensions
| A* | 902 |
| B | 794 |
| C** | 570 |
| D | 152 |
| E | 167 |
* Measured to top of flue collar for height (Kingston, Gosford)
**Including Ash Lip (Kingston)
Clearances To Combustible Materials & Minimum Hearth Measurements
Standard Default Kit (2)
| A | 390 |
| B | 160 |
| C | 200 |
| D | 160 |
| E | 123 (6) |
| F | 380 (6) |
| G | 1015 |
| H | 1080 |
AHD Special Kit – Refer to Manual
| A | 420 |
| B | 220 |
| C | 200 |
| D | 160 |
| E | 123 (6) |
| F | 380 (6) |
| G | 1015 |
| H | 1080 |
Note (2) Standard Default Kit only required includes 2 lengths of decromesh.
Note (6) measured from front edge of floor protector to pedestal base.