Kingston®
Experience the remarkable heat output of the Regency Kingston Wood Freestanding, showcasing Regency’s top-tier wood fire performance alongside contemporary design. This catalytic wood fire unit combines functionality with elegance, boasting smooth contours, a modern door design, and a spacious viewing area that offers a captivating view of the crackling wood fire.
- Perfect for smaller rooms
- Single Rod Draft Control
- Steel Firebox
- Quality Firebrick Lining
Standard Features
- Heats approx. 180 – 220 sq.m*
- Catalytic Stove with Eco-Boost Technology
- Single lever bypass control to engage catalyst
- Single-lever air control
- Steel firebox with firebrick lining
- Rear heat deflector to reduce clearances
- Airwash system helps keep the glass clean
- Discreet ashlip
- Contemporary cast iron door
- 170° opening door for easy loading
- Easy to read thermometer
- Emissions: 0.4 g/kg
- Efficiency: 65%
Options
- Extra large ash drawer with cover
- 2-speed thermostatically controlled fan
- Convector airmate
- Outside air-kit
* Length of burn time and output depend upon wood species used, moisture content of wood, elevation, climate conditions and installation.
Eco-Boost Technology
Specifications (mm)
Heating capacity | 180-220 m2 |
Efficiency | 65% |
Emissions (g/kg) | 0.4 |
Average heat output (kW) | 9.7 |
Where fitted thermostatically controlled fans do not activate until fire heats up and may take 20-30 mins.
NOTE: Heating capacity and any burn times are a guide only and can be affected by some or all of the following examples: drafts under doorways or between floorboards, large glass areas not covered by heavy drapes/curtains, green, wet or damp wood, ceiling heights greater than 2.4 metres or cathedral type ceilings, poor or no insulation.
Heating capacities are based on cooler Australian climate areas – warmer geographical locations within Australia such as Queensland, Northern NSW and Western Australia should factor an increase in unit heating area.
This is a guide – specifications based on the current model at time of publishing. Always refer to the data plate for unit specific details.
Dimensions

A* | 914 |
B | 660 |
C** | 768 |
D | 152 |
E | 225 |
* Measured to top of flue collar for height (Kingston, Gosford)
**Including Ash Lip (Kingston)
Clearances To Combustible Materials & Minimum Hearth Measurements

With AirMate or Rear Deflector
A | 250 |
B | 150 |
C | 100 |
D | 12 |
E | 200 |
F | 300 |
G | 1060 |
H | 1000 |