Mansfield™

Large Wood See-Through Fireplace

Discover the dual-sided allure of this innovative wood heater from Regency, offering twice the viewing area and double the control. With this see-through design, you can enhance the ambiance and warmth in two separate rooms simultaneously. Engineered to surpass the latest Australian standards for emissions and efficiency, this wood heater represents cutting-edge heating technology at its finest.

Standard Features

• Heats approx. 100+ sq.m* (no fan)
• Heats approx. 200 sq.m* (fans fitted) using ducting kits
• Large see-through glass viewing area (790mm x 310mm)
• Draft control, accessible on each side, with airwash
• Removable door handle tool
• Wood loading ability, on each side
• Stainless steel andirons
• 5mm steel firebox – lined with high quality firebrick
• Zero clearance box included
• Low emissions: 1.3g/kg
• 63% efficiency

Options

• Slim line finishing trims available (30mm & 50mm)
• Base frame kit – raises unit 300mm on sturdy steel frame
• Heat distribution kit with flexible ducting, up to 2 can be used
• Outside air kit with flexible ducting
• Regency triple skin, zero clearance, wood fire flue kit available (must be used with this appliance)

* Heating capacity and any burn times are a guide only and can be affected by some or all of the following examples: drafts under doorways or between floorboards, large glass areas not covered by heavy drapes/curtains, green, wet or damp wood, ceiling heights greater than 2.4 metres or cathedral type ceilings, poor or no insulation

Specifications (mm)

Framing

Clearances

Heat Distribution

Increase the effectiveness of your fireplace by dispersing warm air from the fireplace to remote locations in the same room or other rooms in your home by using the heat distribution kit.

Note: Heating capacity and any burn times are a guide only and can be affected by some or all of the following examples: drafts under doorways or between floorboards, large glass areas not covered by heavy drapes/curtains, green, wet or damp wood, ceiling heights greater than 2.4 metres or cathedral type ceilings, poor or no insulation.

All product specifications are subject to change without notice. Before installing refer to the relevant product manual for full and up to date information. Product pictures are a guide only, all wood fires must be installed as per AS 2918 :2001. All Regency wood fires exceed stringent joint Australian and New Zealand Standards ASNZS 4012/4013 (2014). Not all products are available at all outlets.