Narrabri®

Smaller rooms require a wood heater that is fully adjustable and a pleasure to use. With its single rod draft control, the Narrabri is the ideal choice for smaller spaces and its very sturdy build includes a firebrick lining with a steel firebox which combine to ensure longevity.

• Perfect for smaller rooms
• Single Rod Draft Control
• Steel Firebox
• Quality Firebrick Lining

Standard Features

• Heats approx. 100 – 140 sq.m*
• Glass viewing area (340 x 250mm)
• Single rod draft control
• Strong bakelite handles
• Steel firebox with firebrick lining
• Airwash system
• Adjustable leg bolts for levelling on uneven surfaces
• Emissions: 1.4 g/kg

* Varies depending on home floor plan, house layout, heat loss of the house and quality/moisture content of wood.

Specifications (mm)

Where fitted thermostatically controlled fans do not activate until fire heats up and may take 20-30 mins.
NOTE: Heating capacity and any burn times are a guide only and can be affected by some or all of the following examples: drafts under doorways or between floorboards, large glass areas not covered by heavy drapes/curtains, green, wet or damp wood, ceiling heights greater than 2.4 metres or cathedral type ceilings, poor  or no insulation.
Heating capacities are based on cooler Australian climate areas – warmer geographical locations within Australia such as Queensland, Northern NSW and Western Australia should factor an increase in unit heating area.
This is a guide – specifications based on the current model at time of publishing. Always refer to the data plate for unit specific details.

Clearances To Combustible Materials & Minimum Hearth Measurements

Note (3) B clearance can be reduced to 125 mm by the addition of 1 x 900 mm x 180° stainless shield fitted and spaced between the active flue
and the decromesh.
Note (5) Standard default kit can be substituted with flomet super single flue kit.