Renmark®
Distinguished by its modern aesthetics and expansive viewing panel, the Renmark stands out from conventional freestanding wood fires. This convection heater, equipped with an optional 2-speed fan, is specifically engineered for medium-sized living spaces. It effortlessly warms an area of about 180 – 220 sq.m, adding both style and comfort to your home.
- Perfect for smaller rooms
- Single Rod Draft Control
- Steel Firebox
- Quality Firebrick Lining
Standard Features
- Heats approx. 180 – 220 sq.m*
- Large glass viewing area (458 x 260mm)
- Single rod draft control
- Strong bakelite handles
- Steel firebox with firebrick lining
- Airwash system
- Low emissions: 0.5 g/kg
Options
- 2-speed thermostatically controlled fan
- Steel baffle
- Cast iron liners
* Varies depending on home floor plan, house layout, heat loss of the house and quality/moisture content of wood.
Specifications (mm)
| Heating capacity | 180-220 m2 |
| Efficiency | 69% |
| Emissions (g/kg) | 0.5 |
| Average heat output (kW) | 10 |
Where fitted thermostatically controlled fans do not activate until fire heats up and may take 20-30 mins.
NOTE: Heating capacity and any burn times are a guide only and can be affected by some or all of the following examples: drafts under doorways or between floorboards, large glass areas not covered by heavy drapes/curtains, green, wet or damp wood, ceiling heights greater than 2.4 metres or cathedral type ceilings, poor or no insulation.
Heating capacities are based on cooler Australian climate areas – warmer geographical locations within Australia such as Queensland, Northern NSW and Western Australia should factor an increase in unit heating area.
This is a guide – specifications based on the current model at time of publishing. Always refer to the data plate for unit specific details.
Dimensions
| A* | 712 |
| B | 640 |
| C** | 497 |
| D | 152 |
| E | 183 |
* Measured to top of flue collar for height (Kingston, Gosford)
**Including Ash Lip (Kingston)
Clearances To Combustible Materials & Minimum Hearth Measurements
Standard Default Kit (1)
| A | 400 |
| B | 100 |
| C | 175 |
| D | 100 |
| E | 120 |
| F | 350 |
| G | 880 |
| H | 914 |
AHD Special Kit (4)
| A | 450 |
| B | 100 |
| C | 175 |
| D | 100 |
| E | 120 |
| F | 350 |
| G | 880 |
| H | 914 |
Note (1) Standard Default Kit used for clearances includes 1 x 900 mm length of 130° stainless between active flue and 2 lengths of decromesh.
Note (4) AHD special kit can be substituted with Statewide Heating 6141ws kit + 95200.