Vancouver

Choose the Vancouver and infuse your home with the comforting warmth of a wood fire. Tailored for heating medium-sized living spaces encompassing approximately 200 square meters, this wood fire seamlessly combines modern comforts with traditional appeal. Experience efficient heat distribution, the added convenience of an optional ash drawer, and effortless operation, all while honouring the timeless tradition of a classic wood fire.

• Perfect for smaller rooms
• Single Rod Draft Control
• Steel Firebox
• Quality Firebrick Lining

Standard Features

• Heats approx. 200+ sq.m*
• Large glass viewing area (380 x 215mm)
• Single rod draft control
• Steel firebox with brick lining
• Airwash system
• Brushed nickel accent kit (hinge caps & handles)
• Low emissions: 1.9g/kg

Options

• Cast iron door in black, or with nickel trim accents
• Cast iron legs in black or brushed nickel
• 2-speed thermostatically controlled fan
• Ash drawer
• Convector airmate

* Varies depending on home floor plan, house layout, heat loss of the house and quality/moisture content of wood.

Specifications (mm)

Where fitted thermostatically controlled fans do not activate until fire heats up and may take 20-30 mins.
NOTE: Heating capacity and any burn times are a guide only and can be affected by some or all of the following examples: drafts under doorways or between floorboards, large glass areas not covered by heavy drapes/curtains, green, wet or damp wood, ceiling heights greater than 2.4 metres or cathedral type ceilings, poor  or no insulation.
Heating capacities are based on cooler Australian climate areas – warmer geographical locations within Australia such as Queensland, Northern NSW and Western Australia should factor an increase in unit heating area.
This is a guide – specifications based on the current model at time of publishing. Always refer to the data plate for unit specific details.

Clearances To Combustible Materials & Minimum Hearth Measurements

Note (3) B clearance can be reduced to 125 mm by the addition of 1 x 900 mm x 180° stainless shield fitted and spaced between the active flue
and the decromesh.
Note (5) Standard default kit can be substituted with flomet super single flue kit.