Ducted Air Conditioning in Perth: Installation, Cost, Zoning and Design (2026 Guide)

Ducted air conditioning installation is the biggest comfort upgrade you can make to a Perth home, and the one where the quality of the design decides everything. The Bureau of Meteorology recorded a hottest day of 42.1 degrees across Perth Metro on 25 December 2025, and a summer mean maximum above average for every site in Greater Perth. A ducted system answers that kind of heat by cooling the whole house from one quiet unit hidden in the roof, and by heating it just as evenly in winter. But it is also a major investment, and two homes with the same unit can end up with very different results depending on the ducts, the zones and the sizing.

This guide is for anyone considering ducted air conditioning in Perth. It explains how a system is built, how to decide whether ducted is right for your home, how zoning and design work, what to ask about the ducting, what ducted systems cost, and a checklist for comparing quotes. Where we quote numbers, we name the source. For the service itself, see our ducted air conditioning in Perth: design, supply and installation page.

What is ducted air conditioning?

CHOICE describes ducted air conditioning systems as designed to cool and heat an entire home. They have an outdoor unit and a central indoor unit, usually installed in the ceiling or under the floor. Air ducts run from the indoor unit to air outlets and sensors in each room. Most ducted systems are reverse cycle, which means the same machine cools in summer and heats in winter, and CHOICE notes that modern air conditioners produce three or more kilowatts of heating or cooling for every kilowatt of electricity consumed.

The parts you will hear about in a quote are:

  • The outdoor unit (compressor and condenser), placed where noise and airflow are not a problem.
  • The indoor fan coil unit, usually in the roof space of a Perth home.
  • The ducting, insulated flexible or rigid ducts that carry air to every room.
  • Outlets and return air. Ceiling outlets deliver the conditioned air and a return air grille draws room air back to the unit.
  • Zone dampers and controls. Motorised dampers open and close each zone, and a wall controller runs the system.
  • Sensors. They report room temperature back to the controller so each zone reaches the temperature you set.
Diagram of a ducted air conditioning system with outdoor unit, roof-space fan coil, ducts, zone dampers, vents and wall controller

Tap or click the infographic to open it full size.

Is ducted air conditioning worth it for a Perth home?

It is a fair question, and CHOICE asks it too. Its advice is to consider whether separate split systems in a few key rooms would do the job before you spend thousands on a ducted installation, and to optimise your home’s thermal efficiency first because an efficient home is easier and cheaper to keep cool. We agree with both points. Ducted air conditioning earns its cost in specific situations:

  • You want most of the house comfortable. Four or more rooms regularly in use is where ducted starts to beat a stack of split systems.
  • You want a clean look. Outlets in the ceiling and no indoor units on walls suit homes where appearance matters.
  • You need cooling and heating from one system that works in every room, including hallways and bathrooms that a split system never reaches.
  • The home suits it. You need adequate roof space, or the right under-floor space, for the unit and ducts.

It is a worse fit when you only use one or two rooms, when the roof cavity is very tight, or when the budget is better spent on insulation and a couple of split systems. Our comparison of ducted air conditioning vs split systems walks through the decision, and the types of air conditioners explained guide covers the whole landscape.

Perth has a third option that surprises people from other states: ducted evaporative cooling. In the Australian Bureau of Statistics’ 2006 WA survey, ducted evaporative coolers were the most common single cooling unit in WA homes at 32 per cent, and 45 per cent of WA households reported that their cooling unit was ducted. If you want cooling only, at a low power draw, with fresh air, read our evaporative air conditioning vs ducted air conditioning guide first. If you want heating and closed-house comfort in humid weather, ducted reverse cycle is the system.

Ceiling-mounted ducted air conditioning vent grille in a modern Australian hallway

Ceiling outlets keep the walls clear and deliver air to every room, including the hallway.

Ducted vs split system: which is right?

The choice usually comes down to how many rooms you want conditioned and how you live. A split system suits one room or an open-plan area, is quicker to install and costs less up front. Ducted air conditioning suits a home where you want most rooms comfortable, with hidden equipment, one controller and zones that let you condition only the areas in use. Several split systems can cover a whole house, but you end up with a wall unit in every room and an outdoor unit for each one, or a multi head set-up with several pipe runs.

Running cost follows the same logic. One split is cheaper to run than a whole ducted system, but the fair comparison is ducted against the several splits needed for the same rooms, and zoning narrows the gap. Our detailed comparison of ducted vs split system costs, comfort and installation walks through both.

Ducted air conditioning design: what the installer has to get right

CHOICE makes a point that explains why it does not test ducted systems the way it tests split systems: the overall design and the quality of the ducting work are in many ways as important as the air conditioner unit itself. A good unit with poor design will disappoint, which is why the design stage deserves more of your attention than the brand.

Roof space, ducts and the ducting standard

The unit and ducts need space. CHOICE notes that where ceiling space is limited you may need underfloor ducts, though slimline systems exist for homes with small ceiling spaces. The ducting itself must be thermally efficient so that cooling or heating is not lost between the unit and the room. The ducting industry association (ADMA) is concerned that some suppliers install inferior ducting, and recommends asking your installer to confirm that ducts meet the Australian Standard for ductwork, AS 4254. CHOICE advises checking the labels on the ducts or getting a written statement of compliance. It is a simple request that tells you a lot about an installer.

Outlets, return air and sensors

Where the outlets and return air grilles sit decides how evenly the house is conditioned. Large open-plan areas may need multiple sensors, as CHOICE notes. Vent style (ceiling or wall) and positions should be agreed before work starts, because they are hard to change later.

Controls and zones

Controllers are usually hard-wired and wall mounted, and in a large home you may want extra controllers in other areas. Zones let you divide the house into areas such as living, bedrooms and a study, so you condition only the parts you use. CHOICE notes most systems allow zoning for convenience and economy, and the NSW Government’s Planning Portal explains the principle: by zoning, the required size of the air conditioner is reduced and its use is reduced, since it cools or heats one area or the other, not both at once. We cover how this works in practice in our post on ducted air conditioning zones.

Outdoor unit position and power supply

Just as with split systems, the outdoor unit needs a position where noise will not trouble you or your neighbours, and CHOICE notes that large systems may require a three-phase power supply, which is an extra cost if you do not already have it. The same guide mentions that single-phase is enough for most single and multi-split systems, with three-phase possibly needed for very large systems of around 20 kW or more. Check this at the site visit so it appears on the quote, not as a surprise later.

Tradesman fitting insulated flexible ducting to a ducted air conditioning unit in a roof space

The roof-space work, sealed and insulated ducts and a clean layout, decides how well the system performs.

Retrofitting ducted air conditioning into an existing home

Most ducted air conditioning in Perth goes into homes that are already built, and a retrofit has its own checklist. CHOICE points out that putting a brand new ducted system into an existing house, as opposed to incorporating it into a new build, means taking into account a whole lot of details about the structure, inside and out. That is why the site visit matters. The installer needs to see the roof pitch and cavity height, the position of the switchboard, where the outdoor unit can go, how ducts will route around beams, hot water services and other roof-space obstacles, and whether any ceilings need to be cut for outlets. Older homes with low roof pitches or full ceiling cavities can still take ducted systems, but sometimes a slimline unit or an under-floor route is the better answer, and occasionally the honest advice is a multi head split system instead.

How big a ducted system do you need?

Ducted sizing is a design calculation, not a rule of thumb. CHOICE lists the information an installer needs from your home before they can quote properly:

  • The floor plan, including levels and room dimensions with ceiling height.
  • Which direction rooms face, and the size, position and orientation of windows and doors.
  • The type of construction, such as brick or timber.
  • The amount of insulation in the ceiling, under the floor and in the walls.
  • The number of people living in the home and the main use of each area.
  • The ceiling cavity space and the outdoor positions available.

A system that is too small never quite catches up on a 40 degree day, and one that is too large costs more to buy and cycles inefficiently. Zoning changes the maths: because the whole house rarely runs at once, a well-zoned system can be sized to the diversity of how you actually use the home. Ask your installer to show the load calculation and the zone plan together, so you can see the logic. Our guide to ducted reverse cycle air conditioning gives a longer walk-through of zoning and sizing.

Energy ratings and running costs for ducted systems

Ducted systems have to meet minimum energy performance requirements but, unlike split systems, they do not carry the energy rating label. The government’s guide for installers and retailers notes that ducted air conditioners registered under the 2019 Determination are not required to display the zoned energy rating label. That makes the design and the installer’s data more important, and it is a reason to ask for efficiency figures in writing.

Running costs depend on the same factors CHOICE lists for any system: the type and size, its efficiency, how long you run it, the construction of your home, your tariff, and the thermostat setting. CHOICE says each degree cooler you set it in summer, and each degree warmer in winter, raises running costs by 10 to 15 per cent, and suggests 25 degrees in summer and 20 in winter. The Synergy Home Plan (A1) rate is 33.26 cents per kWh from 1 July 2026, so every kilowatt of electricity the system draws costs about 33 cents an hour. How many kilowatts that is depends on the model, the weather and how many zones are running, which is why zoning has such an effect on the bill.

How much does ducted air conditioning cost in Perth?

Cost is the question every buyer asks, and it is worth treating with the same care as the design. On our own live pages, the installed cost of ducted air conditioning in Perth (as at July 2026) is about $8,400 to $14,700 for a basic system and $12,600 to $23,100 for a premium zoned system.

What moves the number: the size of the home, the number of storeys, the number of zones and outlets, the brand and model, the controller, the difficulty of the roof space, and any switchboard or power supply upgrade. These are published ranges, not a quote. The ducted air conditioning cost on your quote also depends on whether the house is a new build or a retrofit, how much roof space the installer has to work in, and how many return air grilles the design needs. For more detail see our breakdown of how much ducted air conditioning costs to install in Perth, and always ask for a written quote after a site visit.

Infographic with ducted air conditioning cost ranges, what moves the price and the CHOICE thermostat tip

Tap or click the infographic to open it full size.

Brands and warranty for ducted air conditioning in Perth

Ducted systems are sold by the same major manufacturers as split systems. Our ducted air conditioning page features Mitsubishi Electric and Hitachi, and Mitsubishi Electric ducted systems come with a five-year warranty on parts and labour as listed on that page. Our guide to ducted reverse cycle air conditioning notes that we also design and install systems from Daikin, Fujitsu and Panasonic. You can read more about Mitsubishi Electric air conditioning, Daikin air conditioning, Panasonic air conditioning and Fujitsu air conditioning on their brand pages.

Whichever brand you choose, check the warranty terms for the unit and for the installation, and who will honour them. Ducts also age: CHOICE notes that as a general rule ducts deteriorate over time, and after 10 to 15 years you can end up losing cool air to the roof cavity before it arrives in your home. A properly installed and serviced system keeps that risk down.

The one question that shows an installer’s standard

“Will the ducting comply with AS 4254, and can I have that in writing?” A good installer answers yes without hesitation.

Ducted air conditioning installation: what happens on the job

A ducted air conditioning installation is a team job that usually spans more than one trade. For a photo-by-photo walk-through of a real job, see our guide to ducted aircon installation. Knowing the sequence helps you plan the days and spot a rushed job.

  1. Set-out and access. The team confirms the unit position, the duct routes and outlet locations from the approved design, and sets up safe access to the roof space.
  2. Indoor unit and ducting. The fan coil unit is mounted and the trunk and branch ducts are run, supported and sealed. Joints are taped and insulated so air is not lost on its way to the room.
  3. Outlets and return air. Ceiling cuts are made for outlets and the return air grille, and each outlet is connected to its duct.
  4. Outdoor unit and refrigerant lines. The outdoor unit is placed and the refrigerant lines connected. As with any air conditioner, refrigerant work must be done by a person holding an ARC Refrigerant Handling Licence.
  5. Electrical and controls. A licensed electrician provides the power supply, and the controller, sensors and zone dampers are wired in.
  6. Evacuation, commissioning and balancing. The lines are pressure tested and evacuated, the system is started, and airflow to each zone is checked and balanced so the far bedroom gets as much attention as the living room.
  7. Handover. You are shown the controller, zones and filters, and given the model details and warranty information.

Ducted heating and cooling: what a reverse cycle ducted system does in winter

Summer is the headline, but the winter side matters for a reverse cycle system. The government’s guide for installers explains that reverse cycle air conditioners in the Average zone, which includes Perth, are used in their heating function for weeks or months over winter, and the unit is likely to run several defrost cycles. That is a reason to choose a model with a good heating rating and to make sure the outdoor unit has space and drainage for defrost water. It is also why a ducted reverse cycle system can replace separate heaters in a Perth home, delivering warmth to every room from the same ceiling outlets that cool it in summer. Is ducted heating gas or electric? It can be either. Gas ducted heating burns gas in a furnace and only heats, while a ducted reverse cycle system is electric and both heats and cools through the same ducts. The government’s Your Home guide describes reverse cycle air conditioners as the most energy-efficient heaters and coolers, and on a home with solar panels the daytime heating can run on your own generation. For a deeper look at how the cycle works, see our explainer on how reverse cycle air conditioning works.

Insulation underpins all of it. In the ABS 2006 WA survey, of homes with cooling, the share with some ceiling insulation was highest for homes with ducted cooling, at 84 per cent. Ducted systems and good ceiling insulation go together, because both depend on keeping the conditioned air where you want it. If your ceiling insulation is thin or patchy, upgrading it before or alongside a ducted installation is money well spent, as CHOICE suggests when it recommends optimising your home’s thermal efficiency first.

Keeping a ducted system clean: filters, outlets and return air

A ducted reverse cycle system has one main filter, and it sits behind the return air grille, usually in the hallway ceiling, not up in the roof. Manufacturers ask owners to clean it regularly: Daikin says monthly during peak summer and winter use, and ActronAir says every one to three months. A blocked return air filter starves the whole system of air, which shows up as weak airflow at every outlet and higher running costs. Our step-by-step guide on how to clean a ducted air conditioner filter shows how to open the grille, clean the filter and refit it safely.

Beyond the filter, the coils, fan, drain and ducts are a job for a licensed technician. ActronAir recommends a professional check every year, especially for ducted systems, and CHOICE’s warning that ducts deteriorate over time is one more reason to have the roof space looked at. When you learn the wall controller, our guide to air conditioner symbols and modes explains cool, heat, dry, fan and auto, and our post on ducted air conditioning running costs and zones shows how to use the zones to keep the bill down.

A quote checklist for ducted air conditioning installation

  1. A site visit. No reputable quote is given without seeing the roof space and the house.
  2. The load calculation and zone plan in writing.
  3. Make and model numbers for the outdoor and indoor units and the controller.
  4. The ducting specification, including compliance with AS 4254 and the insulation level.
  5. The number and position of outlets and return air grilles.
  6. Power supply. Is single-phase enough, or is an upgrade needed?
  7. Electrical and refrigerant licences. Ask for numbers, as with any air conditioning installation.
  8. What is included: making good, rubbish removal, controller, commissioning and handover.
  9. Warranty terms for the equipment and the workmanship, and who services it.
  10. Timing. When the work can start, and how long it will take.
Family relaxing on a sofa in a comfortable Australian living room

The reward for a well-designed system is even, quiet comfort in every room.

Ducted air conditioning in Perth: frequently asked questions

How much does ducted air conditioning cost in Perth?

Joondalup Heating & Cooling’s published installed range in Perth (as at July 2026) is about $8,400 to $14,700 for a basic system and $12,600 to $23,100 for a premium zoned system. Your quote depends on the home and the design.

What are the disadvantages of ducted air conditioning?

The main drawbacks are the upfront cost, the need for roof or under-floor space, the disruption of installation and the fact that the quality of the design and ducting matters enormously. CHOICE suggests also considering split systems in key rooms. Ducts can lose performance over time, so a system should be checked as it ages.

Which ducted air conditioner is best in Perth?

There is no single best brand. CHOICE does not test ducted systems because the result depends on the design and installation in your particular home. Choose a reputable brand, a correctly designed system with a proper zone plan, compliant ducting and an installer who stands behind the work. We install Mitsubishi Electric, Daikin, Fujitsu, Panasonic and Hitachi systems.

What size ducted air conditioner do I need for my house?

It is determined by a load calculation that uses your floor plan, ceiling height, windows, insulation, orientation and how you use each room. Ask your installer to show the calculation and the zone plan. Zoning allows the system to be sized for how the house is really used.

Is ducted air conditioning worth it?

For a whole-home solution with heating and cooling, a clean look and even comfort, often yes. CHOICE advises weighing it against split systems in a few key rooms and improving your home’s thermal efficiency first. If you only use one or two rooms, a split system is usually better value.

Do ducted systems have an energy rating label?

Not under the zoned energy rating label scheme. Ducted systems have to meet minimum energy performance requirements, but they do not carry the label that split systems do, so ask the installer for efficiency data on the model.

Do I need three-phase power for ducted air conditioning?

Sometimes. CHOICE notes large ducted systems may need three-phase power, which adds to the cost if you do not already have it. Single-phase is enough for most single and multi split systems. Your installer should check this at the site visit.

How much does it cost to run ducted air conditioning?

It depends on the power the system draws, the hours it runs, which zones are open and your tariff. Multiply the input power in kilowatts by the hours and by the tariff; at the Synergy A1 rate each kilowatt drawn costs about 33 cents an hour. Our post on ducted running costs and zones works it through.

Is ducted air conditioning cheaper than split system to run?

One split system is cheaper to run than a whole ducted system. Against the several splits needed to cover the same rooms for the same hours, a zoned ducted system run sensibly is comparable, and leaving every zone open is what makes ducted expensive.

Which ducted air conditioner is better, Daikin or Panasonic?

Both make well regarded ducted reverse cycle systems, and the right choice comes down to the specific model, its capacity, controller and zoning options, the warranty and the installation. Daikin Australia says it designs and manufactures its ducted indoor units locally, with some exceptions. Compare model numbers side by side on the quote.

Is ducted heating gas or electric?

Either. Gas ducted heating burns gas and only heats, while ducted reverse cycle air conditioning is electric and heats and cools through the same ducts.

How does ducted air conditioning work?

An outdoor unit and an indoor fan coil in the roof space cool or heat the air, which is pushed through insulated ducts to ceiling outlets in each room and drawn back through a return air grille and filter. Motorised dampers open and close zones, and a wall controller sets the temperature.

Planning a ducted air conditioning installation in Perth?

Licensed local team. Free quote, no obligation. Call (08) 6200 9718.

Get a free quote

Our licensed team will visit, measure, design and quote your ducted system in writing. If you are still weighing the format, our overview of air conditioning installation in Perth compares ducted, split and evaporative side by side.

Sources

Talk To Our Experts Today

Talk To Our Experts Today

This field is for validation purposes and should be left unchanged.

Joondalup Heating & Cooling © 2026. All Rights Reserved. SEO Services by SEO Soar